KnowledgeSetKnowledgeSet
Pricing
Log InGet Started

The learning loop

See all features →
01

Build understanding

Clear explanations. Connected ideas. Help when you need it.

02

Put it into practice

Try it, get feedback, and learn from every attempt.

03

Know what to work on next

See your progress and find a clearer next step.

Key Stage 3
Coming soon
GCSE
  • Biology
  • Chemistry
  • Physics
  • Biology (Combined)
  • Chemistry (Combined)
  • Physics (Combined)
  • Maths
  • Geography
IGCSE
  • Biology
  • Chemistry
  • Physics
A-Level
  • Biology
  • Chemistry
  • Physics
11+
Coming soon
Product
See all features →

Build understanding

Clear explanations. Connected ideas. Help when you need it.

Put it into practice

Try it, get feedback, and learn from every attempt.

Know what to work on next

See your progress and find a clearer next step.

Subjects
Pricing
Log InGet Started
HomeSubjectsAnalyticsSageAILessonsNotesFlashcardsQuestionsFeedback
Notes/IGCSE/Chemistry/Edexcel/Linear

Syllabus

Pearson Edexcel International GCSE (9–1) Chemistry (Linear) — 4CH1

      • •Particle arrangement, movement and energy1.1
      • •Changes of state1.2
      • •Dilution and diffusion1.3
      • •Solvents, solutes and solutions1.4
      • •Solubility1.5C
      • •Solubility curves1.6C
      • •Practical: solubility of a solid1.7C
      • •Elements, compounds and mixtures1.8
      • •Melting and boiling points of pure substances1.9
      • •Separation techniques1.10
      • •Interpreting chromatograms1.11
      • •Rf calculations1.12
      • •Practical: paper chromatography1.13
      • •Atoms and molecules1.14
      • •Subatomic particles1.15
      • •Atomic number, mass number and isotopes1.16
      • •Relative atomic mass from isotopic abundances1.17
      • •Arrangement of the Periodic Table1.18
      • •Electronic configurations of the first 20 elements1.19
      • •Properties of metals and non-metals1.20
      • •Positions of metals and non-metals1.21
      • •Electronic configuration and position in the Periodic Table1.22
      • •Chemical properties within a group1.23
      • •The unreactivity of noble gases1.24
      • •Chemical equations and state symbols1.25
      • •Relative formula mass1.26
      • •The mole1.27
      • •Amount of substance and mass calculations1.28
      • •Reacting mass calculations1.29
      • •Percentage yield1.30
      • •Experimental determination of chemical formulae1.31
      • •Empirical and molecular formulae1.32
      • •Calculating empirical and molecular formulae1.33
      • •Solution concentration calculations1.34C
      • •Gas volume calculations1.35C
      • •Practical: determining a metal oxide formula1.36
      • •Formation of ions1.37
      • •Charges of common ions1.38
      • •Formulae of ionic compounds1.39
      • •Dot-and-cross diagrams for ionic bonding1.40
      • •Electrostatic attraction in ionic bonding1.41
      • •Melting and boiling points of ionic lattices1.42
      • •Electrical conductivity of ionic compounds1.43
      • •Shared electron pairs in covalent bonds1.44
      • •Electrostatic attraction in covalent bonding1.45
      • •Dot-and-cross diagrams for covalent bonding1.46
      • •Simple molecular structures and intermolecular forces1.47
      • •Molecular mass and melting and boiling points1.48
      • •Giant covalent structures1.49
      • •Diamond, graphite and fullerene1.50
      • •Electrical conductivity of covalent compounds1.51
      • •Metallic lattice diagrams1.52C
      • •Metallic bonding1.53C
      • •Properties of metals1.54C
      • •Explaining conductivity of covalent compounds1.55C
      • •Explaining conductivity of ionic compounds1.56C
      • •Anions and cations1.57C
      • •Electrolysis experiments and products1.58C
      • •Electrode half-equations and redox1.59C
      • •Practical: electrolysis of aqueous solutions1.60C
      • •Group 1 reactions with water2.1
      • •Reactivity trends in Group 12.2
      • •Predicting alkali metal properties2.3
      • •Explaining Group 1 reactivity2.4C
      • •Physical properties of the halogens2.5
      • •Predicting halogen properties2.6
      • •Halogen displacement reactions2.7
      • •Explaining Group 7 reactivity2.8C
      • •Composition of dry air2.9
      • •Determining the oxygen content of air2.10
      • •Combustion of elements in oxygen2.11
      • •Thermal decomposition of metal carbonates2.12
      • •Carbon dioxide and climate change2.13
      • •Practical: oxygen percentage in air2.14
      • •Metal reactions with water and acids2.15
      • •Metal displacement reactions2.16
      • •The reactivity series2.17
      • •Conditions for rusting2.18
      • •Preventing rusting2.19
      • •Oxidation, reduction and redox2.20
      • •Practical: metals reacting with acids2.21
      • •Metal ores and uncombined metals2.22C
      • •Reactivity and methods of metal extraction2.23C
      • •Evaluating metal extraction processes2.24C
      • •Uses of aluminium, copper, iron and steel2.25C
      • •Alloys2.26C
      • •Hardness of alloys2.27C
      • •Acid-base indicators2.28
      • •The pH scale2.29
      • •Universal indicator2.30
      • •Hydrogen and hydroxide ions2.31
      • •Neutralisation of acids by alkalis2.32
      • •Acid-alkali titration2.33C
      • •Solubility rules2.34
      • •Proton transfer in acid-base reactions2.35
      • •Proton donors and acceptors2.36
      • •Acid reactions producing salts2.37
      • •Bases and alkalis2.38
      • •Preparing a soluble salt from an insoluble reactant2.39
      • •Preparing a soluble salt from an acid and alkali2.40C
      • •Preparing an insoluble salt by precipitation2.41C
      • •Practical: preparing copper(II) sulfate crystals2.42
      • •Practical: preparing lead(II) sulfate2.43C
      • •Tests for gases2.44
      • •Carrying out a flame test2.45
      • •Flame test colours2.46
      • •Tests for cations2.47
      • •Tests for anions2.48
      • •Chemical test for water2.49
      • •Testing the purity of water2.50
      • •Exothermic and endothermic reactions3.1
      • •Calorimetry experiments3.2
      • •Heat energy change calculations3.3
      • •Molar enthalpy change calculations3.4
      • •Energy level diagrams3.5C
      • •Energy changes in bond breaking and making3.6C
      • •Bond energy calculations3.7C
      • •Practical: temperature changes in reactions3.8
      • •Investigating factors affecting reaction rate3.9
      • •Effects of conditions on reaction rate3.10
      • •Collision theory3.11
      • •Catalysts3.12
      • •Catalysts and activation energy3.13
      • •Reaction profiles and activation energy3.14C
      • •Practical: marble chips and hydrochloric acid3.15
      • •Practical: catalytic decomposition of hydrogen peroxide3.16
      • •Reversible reactions3.17
      • •Examples of reversible reactions3.18
      • •Dynamic equilibrium in a sealed container3.19C
      • •Characteristics of dynamic equilibrium3.20C
      • •Catalysts and equilibrium position3.21C
      • •Temperature, pressure and equilibrium position3.22C
      • •Hydrocarbons4.1
      • •Representing organic molecules4.2
      • •Homologous series, functional groups and isomerism4.3
      • •Naming organic compounds4.4
      • •Structural and displayed formulae from molecular formulae4.5
      • •Substitution, addition and combustion reactions4.6
      • •Crude oil as a mixture4.7
      • •Fractional distillation of crude oil4.8
      • •Names and uses of crude oil fractions4.9
      • •Trends in crude oil fraction properties4.10
      • •Fuels and heat energy4.11
      • •Complete and incomplete combustion4.12
      • •Carbon monoxide poisoning4.13
      • •Nitrogen oxides from car engines4.14
      • •Sulfur dioxide from fuels4.15
      • •Acid rain4.16
      • •Catalytic cracking4.17
      • •Supply and demand for oil fractions4.18
      • •The general formula of alkanes4.19
      • •Saturated hydrocarbons4.20
      • •Alkane structures and names4.21
      • •Substitution reactions of alkanes4.22
      • •The alkene functional group4.23
      • •The general formula of alkenes4.24
      • •Unsaturated hydrocarbons4.25
      • •Alkene structures and names4.26
      • •Addition of bromine to alkenes4.27
      • •The bromine water test4.28
      • •The alcohol functional group4.29C
      • •Alcohol structures and names4.30C
      • •Oxidation of ethanol4.31C
      • •Manufacturing ethanol4.32C
      • •Conditions for fermentation4.33C
      • •The carboxylic acid functional group4.34C
      • •Carboxylic acid structures and names4.35C
      • •Carboxylic acid reactions4.36C
      • •Vinegar and ethanoic acid4.37C
      • •The ester functional group4.38C
      • •Formation of ethyl ethanoate4.39C
      • •Structure of ethyl ethanoate4.40C
      • •Deducing ester structures and reactants4.41C
      • •Properties and uses of esters4.42C
      • •Practical: preparing an ester4.43C
      • •Addition polymerisation4.44
      • •Repeat units of addition polymers4.45
      • •Deducing monomers and repeat units4.46
      • •Disposal of addition polymers4.47
      • •Condensation polymerisation4.48C
      • •Polyester structures and repeat units4.49C
      • •Biodegradable polyesters4.50C

Syllabus

Pearson Edexcel International GCSE (9–1) Chemistry (Linear) — 4CH1

      • •Particle arrangement, movement and energy1.1
      • •Changes of state1.2
      • •Dilution and diffusion1.3
      • •Solvents, solutes and solutions1.4
      • •Solubility1.5C
      • •Solubility curves1.6C
      • •Practical: solubility of a solid1.7C
      • •Elements, compounds and mixtures1.8
      • •Melting and boiling points of pure substances1.9
      • •Separation techniques1.10
      • •Interpreting chromatograms1.11
      • •Rf calculations1.12
      • •Practical: paper chromatography1.13
      • •Atoms and molecules1.14
      • •Subatomic particles1.15
      • •Atomic number, mass number and isotopes1.16
      • •Relative atomic mass from isotopic abundances1.17
      • •Arrangement of the Periodic Table1.18
      • •Electronic configurations of the first 20 elements1.19
      • •Properties of metals and non-metals1.20
      • •Positions of metals and non-metals1.21
      • •Electronic configuration and position in the Periodic Table1.22
      • •Chemical properties within a group1.23
      • •The unreactivity of noble gases1.24
      • •Chemical equations and state symbols1.25
      • •Relative formula mass1.26
      • •The mole1.27
      • •Amount of substance and mass calculations1.28
      • •Reacting mass calculations1.29
      • •Percentage yield1.30
      • •Experimental determination of chemical formulae1.31
      • •Empirical and molecular formulae1.32
      • •Calculating empirical and molecular formulae1.33
      • •Solution concentration calculations1.34C
      • •Gas volume calculations1.35C
      • •Practical: determining a metal oxide formula1.36
      • •Formation of ions1.37
      • •Charges of common ions1.38
      • •Formulae of ionic compounds1.39
      • •Dot-and-cross diagrams for ionic bonding1.40
      • •Electrostatic attraction in ionic bonding1.41
      • •Melting and boiling points of ionic lattices1.42
      • •Electrical conductivity of ionic compounds1.43
      • •Shared electron pairs in covalent bonds1.44
      • •Electrostatic attraction in covalent bonding1.45
      • •Dot-and-cross diagrams for covalent bonding1.46
      • •Simple molecular structures and intermolecular forces1.47
      • •Molecular mass and melting and boiling points1.48
      • •Giant covalent structures1.49
      • •Diamond, graphite and fullerene1.50
      • •Electrical conductivity of covalent compounds1.51
      • •Metallic lattice diagrams1.52C
      • •Metallic bonding1.53C
      • •Properties of metals1.54C
      • •Explaining conductivity of covalent compounds1.55C
      • •Explaining conductivity of ionic compounds1.56C
      • •Anions and cations1.57C
      • •Electrolysis experiments and products1.58C
      • •Electrode half-equations and redox1.59C
      • •Practical: electrolysis of aqueous solutions1.60C
      • •Group 1 reactions with water2.1
      • •Reactivity trends in Group 12.2
      • •Predicting alkali metal properties2.3
      • •Explaining Group 1 reactivity2.4C
      • •Physical properties of the halogens2.5
      • •Predicting halogen properties2.6
      • •Halogen displacement reactions2.7
      • •Explaining Group 7 reactivity2.8C
      • •Composition of dry air2.9
      • •Determining the oxygen content of air2.10
      • •Combustion of elements in oxygen2.11
      • •Thermal decomposition of metal carbonates2.12
      • •Carbon dioxide and climate change2.13
      • •Practical: oxygen percentage in air2.14
      • •Metal reactions with water and acids2.15
      • •Metal displacement reactions2.16
      • •The reactivity series2.17
      • •Conditions for rusting2.18
      • •Preventing rusting2.19
      • •Oxidation, reduction and redox2.20
      • •Practical: metals reacting with acids2.21
      • •Metal ores and uncombined metals2.22C
      • •Reactivity and methods of metal extraction2.23C
      • •Evaluating metal extraction processes2.24C
      • •Uses of aluminium, copper, iron and steel2.25C
      • •Alloys2.26C
      • •Hardness of alloys2.27C
      • •Acid-base indicators2.28
      • •The pH scale2.29
      • •Universal indicator2.30
      • •Hydrogen and hydroxide ions2.31
      • •Neutralisation of acids by alkalis2.32
      • •Acid-alkali titration2.33C
      • •Solubility rules2.34
      • •Proton transfer in acid-base reactions2.35
      • •Proton donors and acceptors2.36
      • •Acid reactions producing salts2.37
      • •Bases and alkalis2.38
      • •Preparing a soluble salt from an insoluble reactant2.39
      • •Preparing a soluble salt from an acid and alkali2.40C
      • •Preparing an insoluble salt by precipitation2.41C
      • •Practical: preparing copper(II) sulfate crystals2.42
      • •Practical: preparing lead(II) sulfate2.43C
      • •Tests for gases2.44
      • •Carrying out a flame test2.45
      • •Flame test colours2.46
      • •Tests for cations2.47
      • •Tests for anions2.48
      • •Chemical test for water2.49
      • •Testing the purity of water2.50
      • •Exothermic and endothermic reactions3.1
      • •Calorimetry experiments3.2
      • •Heat energy change calculations3.3
      • •Molar enthalpy change calculations3.4
      • •Energy level diagrams3.5C
      • •Energy changes in bond breaking and making3.6C
      • •Bond energy calculations3.7C
      • •Practical: temperature changes in reactions3.8
      • •Investigating factors affecting reaction rate3.9
      • •Effects of conditions on reaction rate3.10
      • •Collision theory3.11
      • •Catalysts3.12
      • •Catalysts and activation energy3.13
      • •Reaction profiles and activation energy3.14C
      • •Practical: marble chips and hydrochloric acid3.15
      • •Practical: catalytic decomposition of hydrogen peroxide3.16
      • •Reversible reactions3.17
      • •Examples of reversible reactions3.18
      • •Dynamic equilibrium in a sealed container3.19C
      • •Characteristics of dynamic equilibrium3.20C
      • •Catalysts and equilibrium position3.21C
      • •Temperature, pressure and equilibrium position3.22C
      • •Hydrocarbons4.1
      • •Representing organic molecules4.2
      • •Homologous series, functional groups and isomerism4.3
      • •Naming organic compounds4.4
      • •Structural and displayed formulae from molecular formulae4.5
      • •Substitution, addition and combustion reactions4.6
      • •Crude oil as a mixture4.7
      • •Fractional distillation of crude oil4.8
      • •Names and uses of crude oil fractions4.9
      • •Trends in crude oil fraction properties4.10
      • •Fuels and heat energy4.11
      • •Complete and incomplete combustion4.12
      • •Carbon monoxide poisoning4.13
      • •Nitrogen oxides from car engines4.14
      • •Sulfur dioxide from fuels4.15
      • •Acid rain4.16
      • •Catalytic cracking4.17
      • •Supply and demand for oil fractions4.18
      • •The general formula of alkanes4.19
      • •Saturated hydrocarbons4.20
      • •Alkane structures and names4.21
      • •Substitution reactions of alkanes4.22
      • •The alkene functional group4.23
      • •The general formula of alkenes4.24
      • •Unsaturated hydrocarbons4.25
      • •Alkene structures and names4.26
      • •Addition of bromine to alkenes4.27
      • •The bromine water test4.28
      • •The alcohol functional group4.29C
      • •Alcohol structures and names4.30C
      • •Oxidation of ethanol4.31C
      • •Manufacturing ethanol4.32C
      • •Conditions for fermentation4.33C
      • •The carboxylic acid functional group4.34C
      • •Carboxylic acid structures and names4.35C
      • •Carboxylic acid reactions4.36C
      • •Vinegar and ethanoic acid4.37C
      • •The ester functional group4.38C
      • •Formation of ethyl ethanoate4.39C
      • •Structure of ethyl ethanoate4.40C
      • •Deducing ester structures and reactants4.41C
      • •Properties and uses of esters4.42C
      • •Practical: preparing an ester4.43C
      • •Addition polymerisation4.44
      • •Repeat units of addition polymers4.45
      • •Deducing monomers and repeat units4.46
      • •Disposal of addition polymers4.47
      • •Condensation polymerisation4.48C
      • •Polyester structures and repeat units4.49C
      • •Biodegradable polyesters4.50C

Simple molecular structures and intermolecular forces

Edexcel·Chemistry·1.47·Linear

Notes Coming Soon

The concept content for this specification point is being prepared. Check back soon.